It is normally recommended to not do the sanding process between touch-up base color paint, the clearcoat, and primer coats. However, if little dirt lands in the paint we may let the paint dry and should sand out the speck. Drywall sanding is the method that is used to finish drywall joints as it produces the smoothest finish. Wall Sander dealers in Ghaziabad provide the best quality wall sanding machine at a very reasonable price.
Mentioning below the reasons why Sanding between coats is not recommended :
The main reason behind not recommending sanding between coats is that the paint could still be too soft to sand despite it will feel very dry to touch.Sanding between coats of primer is pointless. We should sand the primer before moving on to the basecoat color once the primer is dry.While sanding at the end of the primer step gives the same results as Sanding between coats of primer will just extend how long it takes to complete the phase.If there is something wrong with the application, sanding between coats of the base coat should only be done.Sanding Metallic or Pearl colors can destroy the whole effect and that will shift the color or the pattern of pearl.If we have to sand the base coat at any step it must be recoated with another layer of color before moving on to the clearcoat step.The process of Sanding between the layers of clearcoat is also not recommended.Wet sanding and polishing the final layer will provide a better result than doing it between each coat.Clear-Coat layers are also thinner than they look.
If we have some dust or dirt on the surface we can still sand it out and respray a more clear coat but it will take a longer time.
Therefore, These are the reasons why sanding between the coats is not recommended. Just like wall sanding, wood sanding is done to provide a smooth surface before starting the wood-related work. Wood sander dealers in Faridabad provide the best quality wood sanding machine at affordable rates.